Despite its centuries-old history, stucco moldingfor finishing the ceiling is still very popular. Today it is produced not only from gypsum, but also from more modern material - polyurethane. He has many positive qualities. The main one is that the ceiling skirting from polyurethane is almost impossible to distinguish from plaster, but it lasts much longer. In addition, polyurethane foams are so versatile that they fit into almost any interior.
Like every building material, thiscornices have their own properties and features during installation. What is a ceiling skirt made of polyurethane (photo), installation methods, decor, and this article is devoted to. We hope that the information will be useful.
Ceiling plinth is an important decorativeelement. Closing the defects when wallpapering the wallpaper at the joint of the ceiling with the wall, it logically complements the interior and makes the overall appearance of the room more complete. With the help of such material, it is also possible to visualize the height of the ceilings visually or, conversely, to make them lower.
Ceiling plinth of polyurethane - the mostThe optimal option for the ratio of price-quality-reliability. The material from which the strips are made is environmentally friendly and has fireproof qualities.
Unlike polystyrene cornices, polyurethane is more resistant to mechanical damage, and the pattern on it is sharper and more bold.
Polyurethane cornices have certain advantages. Consider them.
Despite the entire volume of positive sides,buyers in their reviews note one huge shortage of material: weight. In this regard, you need to carefully select the fasteners on which you will plant the ceiling skirting of polyurethane. If the installation is poor, the cornice will sag.
Installation of a skirting board made of polyurethane can be made in two ways:
Each of them includes several stages. No condition can be allowed in any case, otherwise the design may subsequently be violated.
To install such a cornice with glue,will require a special formulation for polyurethane, polystyrene, or any liquid nails with a super strong fixer. If the plinth will be fastened directly to a concrete, wooden or gypsum board wall without wallpaper, then this moment should be taken into account.
During installation, the elementsjoints are formed. For their formulation, it is better to choose a special substance on an adhesive basis. It has a function of soldering, as a result of which the joints will be less noticeable, and the place of gluing will be securely fixed.
When the glue is selected, it is possible to begin installing a ceiling skirting of polyurethane. Installation is as follows.
If there are enoughstrong bends or hold the skirting itself is not very convenient, it can be fixed with thin hairpin nails. Upon completion of the finishing works, these peculiar clips can be removed or, if necessary, further toning of the plinth should be left, disguised with paint.
It is recommended to install particularly heavy and textured elements on special mounting plates. As a rule, such fastening goes in the complete set together with a plinth.
White ceiling plinth made of polyurethane will bepractical in almost any interior. However, with an unusual design solution, a light tint may look foreign. In this case, the foam polyurethane curtain can be painted.
It is best to paint after installationplinth. Since the installation of the elements must pass at least 24 hours, and in a humid room - about 48. For the decor, select the usual water-dispersion or acrylic paint of the required shade.
To avoid paint on the walls and ceilingThe area next to the skirting board is covered with a film or a paint tape. It is more convenient to produce the work with a brush. Pulverizer is not contraindicated, but it is more appropriate to use it on larger areas.
In order not to be mistaken when installing a ceiling skirting board, take note of some recommendations of professional builders:
Both ordinary buyers and professionals noteconsiderable durability of the material, ease of installation and painting. Polyurethane strips are beautiful, this is perhaps the only option that is possible to mask the joint between walls and ceilings.
Accessibility is another undeniable advantage,which has a ceiling skirt made of polyurethane. The price for it at first glance may seem overestimated: a good cornice of medium width will cost about 400-500 rubles per meter. However, the impression is deceptive - the quality and appearance of such finishes fully justify its value. There is hardly anyone who will be dissatisfied with such beauty.
