Bikrost khp - what is it? Bikrost HPP: characteristics, roll weight

If for work you decide to useBikrost HPP, what it is, be sure to know. Bikrost HPP is a rolled roofing material based on bitumen, designed for waterproofing, it has a reinforcing base in the form of fiberglass, as well as a bitumen binder, which is applied on both sides. This binder contains special technological additives that are designed to improve the performance of materials, as well as extend their life. From all sides bikrost HPP has a protective coating, which is a fused film based on polymers.

If you are interested in Bikrost HPP, what is itsuch, you must know before purchasing. This material can be used in all climatic zones. It is produced in the walls of the plant Corporation "TechnoNIKOL".

Material Features

At the heart of bikrost HPP contains fiberglass,which is a material that does not rot. Among other things, fiberglass is not torn and has a negligible cost, if compared with other analogues. Bikrost HPP is of high quality, and it is based on a large amount of bitumen, as well as an increased amount of binder, which is located on the weld side. Increasingly, homeworkers are wondering about what HPP bikrost is used for, what it is, it is also important to find out. The special manufacturing technology and composition of the material provide it with excellent performance characteristics, it allows to use this waterproofing even in difficult climatic conditions. TechnoNIKOL uses the most advanced equipment as well as the latest trends when producing bikrost, which makes it possible to obtain an excellent material that has an excellent price-performance ratio if compared with competitors.

The term life of the material

Bikrost GPP can serve 10 years, this period is guaranteed by the manufacturer, during this time it is not necessary to replace the waterproofing of the roof.

Features of use

Before you buy bikrost HPP, that issuch need to know. It is used as a lower layer of the roofing overlay, during the arrangement of the system a vapor barrier is used, which fits into two layers, among other things, the vapor barrier can be laid in one layer. Bikrost HPP is used as the lower layer, while the upper layer is Bipol ECP.

Technical characteristics of the material

Bikrost HPP vapor barrier has excellentquality characteristics. The temperature at which the knitting component becomes brittle, is at around -15 degrees. Flexibility on a bar with a radius of 25 millimeters is achieved at around 0 degrees. Heat resistance of the material is able to demonstrate at elevations up to +80 degrees. The tensile strength in tension is 294 N. The sheeting of a material is a film that is used both from below and above.

Bikrost HPP, whose characteristics are described inThe article has a thickness which is equal to 2, 6 mm. The water absorption of this waterproofing material is 1 percent by mass, which is true if the material is exposed to moisture for 24 hours. Bikrost HPP has absolute water resistance. Before purchasing, it is imperative that you familiarize yourself with the roll parameters, for example, the width and length are 1 and 15 meters respectively. The useful area of ​​the roll is 14 m². Weight bikrost HPP, or rather the weight of one roll, is 45 kilograms. Using bikrost HPP, you will need to use mastic, aerator, primer, funnel, burner.

Stacking technology

Bikrost BPP, the weight of the roll which you need to knowbefore purchase, is a build-up material, which should be laid in a gas-flame method using a propane torch. If a single-layer base coating is used, the surface should be first treated with a primer represented by a bituminous primer.

Packaging and dimensions

When you purchase on a pallet you will be delivered 23roll, which is 230 square meters, the weight of one such pallet filled with material will be 1035 kg. Rolls are delivered on wooden pallets, the size of one roll is 1, 12 x 1, 20 meters. The material will be installed vertically and protected by a shrink bag. To avoid deformation during transportation and storage, the rolls are supplied with heart-shaped sleeves made of cardboard. On each pallet of materials you will find a label indicating some parameters, among which: the manufacturing plant, the batch number, the shift number, the material grade, the number of square meters, the production date, and the name of the material. Bikrost HPP is produced according to TU 5774-042-00288739-99 and corresponds to SNiP 23-01.

Scope of use

Bikrost HPP is used for the arrangement of the lowerlayer of roofing, which should be flat. Among other things, this material is used for waterproofing works in the field of the foundation, is used for waterproofing the floor, as well as basements. It is used for vapor barrier roof garage, for screed, for pools, bathrooms, as well as pipe insulation.

Additional material features

The material can be used as a liningcarpet, but it can not be used as a finishing coating for the roof, this is due to the fact that the material does not have a protective top layer. It can be compared with roofing material. Despite the fact that the life of the material is very small, this minus is compensated by its insignificant cost, we can say that the material belongs to the economy class goods, is very similar to this material by the characteristics of bikrost HKP. As its only difference, it is possible to highlight the fact that the top layer has sprinkling in the form of crumbs. Because of this, it can be used as a roofing material on roofs, however, the surface should not be under heavy loads.