If you decide to build a pile-grillthe foundation for a wooden house, it is first necessary to get acquainted with reviews that are left by home masters and professionals involved in carrying out such work. Such a construction is a support on which the load from the entire structure is assigned. In this case, piles or screw products are used in the role of piles. Grillage, in turn, performs the function of dislocation load from the building. Formation grillage is carried out with the help of beams or slabs, which are formed in a single system.
The pile-foundation foundation under the wooden housecan be built on the territory, the soil of which is problematic. This mainly applies to clay soils. The base, formed using piles, allows you to transfer a significant load to hard rocks that are located deeper than the top layer. It should be noted that this type of foundation can also be built on favorable, conventional soils.
Modern masters resort to constructionpile-grill foundation for the reason that such a system has a high load-bearing capacity. Among other things, private developers say that they are attracted by the economy, which can be achieved due to a small amount of excavation. Reading reviews, it is worth highlighting that the masters use this basis when it is necessary to build wooden structures, as well as structures of frame and shield type.
The pile-foundation foundation under the wooden housecan be built using different materials. Each of them is distinguished by its quality characteristics and duration of operation. Some consumers choose wooden supports, while other buyers most often prefer metal or reinforced concrete products. It is worth noting that the wooden piles of the master are chosen in the event that they will be rendered an insignificant load. Preference for this is coniferous wood, the most suitable pine.
The pile-foundation foundation under the wooden housecan be erected with the help of reinforced concrete pylons. They are most in demand today and represent hollow pillars, which can have a square or circular cross-section. Metal supports, as practice shows, need additional processing with special compounds that can prevent corrosion processes. Wooden supports, according to consumers, are the most short-lived. After a while they start to smolder in the ground.
If you decide to use for constructionpile-foundation foundation under a wooden house, it is initially recommended to get acquainted with the positive and negative sides of this type of foundation. Most often, the owners of houses that were built using this technology note that the uniqueness of the design is that it can be formed on different soils. However, it is worth to refuse to carry out works, if magmatic soil or sedimentary soil is found on the territory. Many residents are attracted by the fact that construction takes very little time. Then you can start work even in the cold season. Future owners note that their choice was influenced by the excellent bearing capacity of the base. If you compare with the ribbon foundation, then the described type of construction is much cheaper.
Pile-foundation foundation, reviews about whichyou have the opportunity to read in the article, can be easily erected independently. To do this, it will only be necessary to screw the supports into the soil for a certain distance. After using the Bulgarian, you should cut the piles in such a way that they are at the same level.
Before the start of construction, you mustto familiarize with the disadvantages of the foundation. Among them, modern consumers note the impossibility of carrying out manipulations without using special equipment and tools. This increases the cost of work. If there is a rocky ground in the development area and there is a layer of limestone and stones that is hard, it will be impossible to form a pile foundation with a grillage.
A number of professional builders give upThis type of foundation for the reason that under it is impossible to lay a warmed basement room. At the first stage it is rather difficult to make calculations, that's why you will have to entrust conducting these works to professionals. The pile-foundation foundation, the shortcomings of which are described in the article, can not be analyzed after the supports are pinned to the ground. This excludes the possibility of detecting damage.
Pile-foundation foundation by own hands canbe erected according to a certain scheme. To begin with, it is necessary to form the wells using a manual drill. At the next stage, a formwork is installed, the upper edge of which must be slightly above the ground surface. The material should be raised by 300 millimeters. Further, pipes are formed of roofing material, the diameter of which should be equal to the dimensions of the well. Then how to damp these elements is necessary for 300 millimeters lower in comparison with the pits themselves. After the resulting formwork is reinforced, for which it is possible to use metal rods. The next step will be pouring the concrete mixture.
You can perform grillage using an iron orconcrete beam. To do this, between the pillars should dig a trench, the depth of which should be equal to 30 cm. After the sand is poured, covers the roofing material, and also the formwork is installed. In the formed space is poured concrete.
