/ / Mount for a tablet in the car with your hands

Mount for a tablet in the car with your hands

Tablet computers, or simply tablets, alreadylong ago became suitable for use in cars. Motorists have adapted these thin and powerful devices as a replacement for full-time recorders, gps-navigators, and some experts in electronics and programming even use them as an onboard computer. The tablet is convenient, practical and in traffic jams is not so boring. And if there are children, then you can take them with your favorite games or watching cartoons on long and tiring journeys. Some even adapted the tablets as DVRs, and they perform their functions perfectly.

How to fix the tablet computer in the car? Types of holders

Multifunctionality, multimedia functions, as well as minimum dimensions and power - all this is very, very good. It remains only to make a mount for the tablet in the car.

Today the market is literally overflowing with various types of fasteners. There are many such holders.

So, among all the devices are the following structures:

  • Framework universal. Most often installed on the center console.
  • On suckers (attached to the automotive windshield).
  • Anti-slip mats.
    tablet mount in the car

Many do not want to bother with the choice andget a universal mount for the tablet in the car. These designs can be adjusted in height, width and other parameters. Mobile devices of any diagonals become free into these holders. You can rotate the device both vertically and horizontally. There are also models from well-known manufacturers, but they are few and expensive.

Where to fix the tablet?

For these purposes, there are only a few seats in the cabin.car. You can mount the holder on the dashboard, on the glass on the right, on the grille of the ventilation system. You can also install a computer on the back of the headrest. We will analyze the pros and cons for each of these places.

On the torpedo tablet will look perfect.Often they are fixed as if he was always there. But such structures are not on sale, so motorists and car owners prefer to make such devices on their own. It all depends on manual dexterity and fantasy.

mount for a tablet in the car on the headrest

To the right of the driver, you can install a mount fortablet in the car on the glass. Naturally, you can purchase a finished structure, or you can make it completely yourself. It is much more interesting, and also allows you to get an interesting experience.

Mount for a tablet in the car with your hands

So, here we are getting to the most interestingparts of the article. Previously, many, before becoming car owners, had bicycles and motorcycles and regularly "collective farm" for them because of the lack of necessary spare parts.

mount for the tablet in the car on the glass
So here, because the search for easy ways is not our method. We will try to make a mount for the tablet in the car with their own hands. It is very interesting and economical.

Fasten the tablet to the ventilation grille

To make the mount for the tablet in the car on the duct, you need the device itself, some stainless steel, a welding machine, as well as a plumbing tool.

This homemade design has a variety ofadvantages over rather flimsy holders from the Chinese brothers. The design is very convenient to use, it is very easy to make, it does not take a lot of extra space in the cabin of your car. For the manufacture will need only the skills of working with metal and welding machine.

mount for the tablet in the car on the torpedo

Cons design has not.If necessary, it is very easily removed, it is a universal mount for a tablet in a car on a torpedo. In general, there are a lot of variants of such constructions. You can use different clips, brackets.

Where to begin?

First you need to find a stainless steel.Next, you need to measure the strip for the manufacture of the stand. 2 vertical stripes recommended. The desired stripes should be 1 cm wide and 17 long. You also need to prepare one horizontal strip with a length of 25 cm and a width of 1 cm. Next, you need to cut the strip and bend their edges. So it will be more convenient to use this thing.

The upper parts of the strips need to be bent.more than the bottom. You should get a construction similar to the integral. The curved top of our strips will cling to the grille of the air ducts, and the lower curved one will hold the tablet. The horizontal strip must be fastened in such a way that it keeps the high-tech device from lateral displacements. Then such a mount for the tablet in the car will be able to securely hold the tablet, and it will not fall out when driving on our roads.

You can also make additional inserts in this design. They do not have any functional load, but slightly increase the angle of the tablet.

As a decorative treatment can be pastedreceived holder with cloth, leather or anything else. As a result, the mount for the tablet in the car hooked into the grille of the duct and securely held there.

Fasten the computer instead of ducts

This is a way to insert a tablet PC into a car dashboard. The mobile computer will be mounted in the middle duct. This method is suitable for cars VAZ.

What to do?

First you need to remove and disassemble the bodyductwork. By the way, it's not so easy to disassemble it. There are a lot of small details. Gutted? Now you need to take the frame and try it on the tablet. The frame is suitable for small devices. If the mobile device is not expensive, then perhaps the screen will fade. Therefore, it is desirable to drown him in a niche from ventilation.

mount for the tablet in the car with their own hands

Further, after all measurements need to cutpartition between two ventilation panels. Then, when we got a single niche, we need to try the structure from the tablet and the frame again. Depending on the measurement results, it may be necessary to cut the panel from the vents a little more.

mount for the tablet in the car on the duct

Next you need to glue the frame on the double-sidedScotch tape to the tablet screen, to the non-working part of it. Then you should insert the structure into the cavity and put it on a double-sided tape. When everything is done perfectly, you need to handle those places where there was a partition before. It needs to be sanded, primed and painted, possibly, and decorated.

mount for the tablet in the car on the glass

Also as an attachment, you can askfriends bracket from the broken holder and make yourself from metal frame or strip to directly hold the mobile device and fasten it anywhere, for example, so you can make a mount for a tablet in the car on the headrest. In this case, the bracket of the finished design will not bother to create it, and the metal holders will become much more convenient for the shaky plastic parts. Children will thank you for the tablet in the back passenger.

Liked:
0
Popular Posts
Spiritual development
Food
yup