Buy a new configured router - not a problem fordomestic user, but often there is a need to make some adjustments of parameters for themselves. This is where the problems start, because the operating instructions contain only data on the installation of global parameters of network equipment for smooth operation on the Internet.
The focus of this article is setting up the DIR-320.The step-by-step guide will not only help the user quickly master the control panel of the router, but also introduce you to all the functionality of a network device that is not advertised in the specifications when purchased.
Many owners of computer equipmentface problems when connecting a router to a personal computer or laptop. The problem lies in the settings - the computer and the network device are working in different networks. The first step that the owner of the DIR-320 router should do is reset the settings. The procedure is simple. On the back of the device there is a "Reset" button. It is necessary to connect the router to the electrical network, wait until the device is loaded (15-20 seconds) and with a sharp object (needle or toothpick) to hold the reset button for a few seconds. An indication of the reboot will be an indication on the router - all the lights blink simultaneously.
Setting up the router DIR-320 begins withconnect to workstation. The Patchcord cable included in the kit should be connected to a personal computer or laptop. On the network equipment 5 ports, one of which is designed to connect to the Internet (WAN). The remaining ports are needed to build a local network. That's one of them and you need to connect the cable "Patchkord."
The router DIR-320 is configured in such a way that whenWhen connected to the Internet, the device automatically gains unhindered access to the global global network. Accordingly, the four LAN ports of the router allow the user to connect to the Internet. In fact, the owner of the network device does not need to configure anything. The main thing is to connect the network cables correctly.
Most personal computersUsers have automatic settings on the network, but there are exceptions. Therefore, to meet with force majeure. Setting up the DIR-320 router is possible only in cases when the network equipment and personal computer are in the same local network. The default is 192.168.0.1 - 192.168.0.254. The router picks up the first value and automatically assigns addresses to all devices connected to it. Accordingly, the computer should automatically receive the address from the network equipment, otherwise the DIR-320 configuration will not be possible.
Going to the "Network Control Panel",the user needs to go to the "Change adapter settings." Having found the desired connection, click on it with an alternative mouse button and select "Properties". In the menu that appears, place the cursor on the "IP version 4" field and click the "Properties" button. After that, in the opened menu, set the “Receive automatically” option in the two fields of the computer settings and save.
Router DIR-320 is controlled throughWeb-interface, so the user needs to open any browser and in the address bar type "192.168.0.1". If the router is properly connected to the computer after a short delay, the monitor will display the prompt for network equipment to enter the control panel asking for the login and password.
The login details are shown on a sticker thatcan be found on the bottom of the router case. Often the login and password are identical by default - “admin”. It is entered without quotes, in capital Latin letters in both fields of the query.
For D-Link DIR-320 router hardware setupstarts with software updates from the manufacturer’s official website. To do this, go to the link specified in the user manual and download the latest firmware version. Alternatively, the software for the router can be downloaded from the provider's website. After all, the Internet service provider is interested in ensuring that his client has a secure firmware. Often, the provider provides users with a ready-made firmware with settings for the network. Naturally, it needs to be downloaded before connecting the router to the computer.
Прошивается DIR-320 просто.In the control panel, go to the “Maintenance (Maintenance)” tab and select the “Firmware Update” item. A dialog box opens and prompts you to specify the path to the file on your personal computer. After clicking the “Ok” button, the download will begin. At the end of the firmware procedure, the equipment will be rebooted automatically.
Setting up the DIR-320 can be done as inmanual mode, and in automatic. At least, so says the manufacturer. In fact, all additional settings are made manually. Automatic mode (with an assistant) only provides the user with the correct sequence of menu items for the convenience of making the necessary parameters. If you need to configure an Internet connection, the assistant offers to enter the necessary data for the correct connection. Otherwise, the control panel provides access to wireless interfaces.
In the router DIR-320 WiFi setting is carried outjust - you need to specify the name of the access point (the name of the detected network) and set a password. All other parameters are set automatically. In manual mode, the user will have to independently set a dozen parameters. Many users believe that manual configuration is more interesting in terms of training in working with a network device, however, it is many times more complicated than automatic input.
In the router DIR-320 3G setting is carried outonly in manual mode. Before making changes, owners should be familiar with the operating manual, which describes in detail the operation of the device with several providers simultaneously. The fact is that with inept actions the owner can disrupt the work of the wired connection.
On the control panel, select the first item.“Internet settings” and go to the “Settings” section. In the window that appears, click the "Manual Settings" button located at the bottom. In the next window, user selection should be made in favor of a “PPP USB connection”. Since the D-Link DIR-320 modem setting is not specifically tied to 3G (you can even connect a regular GPRS phone), the user will have to fill in only the required fields. For a 3G connection, the following information is specified: login, password and dial-up number. For the phone, you need to additionally register the server of the operator and specify the command for dialing.
Интересна также в роутере D-Link DIR-320 setup of the demilitarized zone. Hidden from the eyes of others, the network can combine all the electronics in the house, providing access to it via the network to only one owner. If we talk about security, then the DMZ menu item is required for detailed study by the user.
Любителям онлайн-игр придётся познакомиться с port forwarding, because very often providers close unused ports. This is done to protect your own network, but many people forget about game lovers. With port forwarding in the DIR-320, everything is simple: the protocol is indicated, then the replaced ports are written opposite each other.
This is not to say that the router configurationon their own will be easy. Network equipment requires a lot of attention and certain knowledge. Any parameter specified incorrectly will cause the router to malfunction, and, accordingly, will block the user's access to the Internet. But any problem is solved: the router can always be returned to the factory settings and start all over again.
Still, experts in IT technology.Recommend to owners of network devices to get acquainted with the instruction manual - the usual scrolling will not be enough. Need to read the manual completely. Only after studying the basic parameters and correctly filling in all the fields on the control panel of the device, the DIR-320 setup can bring results.
