Tackle "carp killer" - the perfect solution forfishing at any time of the year. In addition, it is suitable for fishing on a spinning or ordinary fishing pole. In the summer season, when the crucian is full, the most spectacular will be fishing on a feeder rod with a “killer crucian” rig. Such tackle from various manufacturers can be found in fishing stores, and you can do it yourself.
Fishing for crucian carp is possible onsmall reservoirs, as well as in deep reservoirs. It uses both a lightweight picker and a heavy feeder. The fishing line must be used woven, because it accurately passes the bite and does not stretch. Leads must be short to be near the feeder. Tackle "crucian carp killer" is attached to the main line with a small carbine.
As bait, usually useda large enough piece of foam so that the crucian cannot swallow the hook. In addition, this material raises the hook from the bottom. On the tackle, "the killer of a crucian" clings immediately several hooks, so that the probability of catch increases significantly. As bait can be used dough or mastyrka. In order to bait is not washed away and not scattered when hitting the water, you should fill it as tightly as possible.
Many fishermen believe that the crucian carp is prettystupid fish, resulting in a return home without a catch. Therefore, no special gear can not do. At the same time branded gear, as a rule, have certain disadvantages. Among them it should be noted that the hook is tied tightly, or it is difficult to quickly change the weights.
Thanks to homemade gear, you can at any time.change the sinker depending on the depth of the reservoir, the strength of the wind and the current. However, the main advantage of such a snap is a high level of sensitivity. Therefore, self-trapping occurs at a time when the supply of the fishing line reaches the bead located above the hook attachment, and before that, when you bite, you can make hooking.
In order to make a tackle "Killer carp" with his own hands, you will need simple tools and inexpensive materials that every fisherman has.
It will take:
In order to make this gear, you shouldAttach a swivel to one end of the thread, from which it is necessary to retreat 10-12 cm and fix the bead. To do this, you need to thread a thread through it twice and secure with a double knot. After that, another swivel is put on the thread, the second bead is fixed in the same way as the first.
The feeder is put on the thread so that itmoved freely on it. Next comes the swivel, which is fixed by a bead, and another trough is attached. Such equipment on a crucian can contain various quantity of feeding troughs. The last element should be a bead. After that, the first fixed swivel hangs a sinker of the required size.
Finished gear must be equipped with hooks. It is desirable that the length of the leash of each of them was less than 6 cm. In this case, the leashes can be made from fishing line or from a thread.
При изготовлении снасти очень важно следовать simple rules. First use as few nodes as possible. The fact is that no matter how knot you knit, the more of them, the weaker the tackle.
Tackle "crucian killer" do it yourselfto make. However, it will have maximum efficiency if you use different bait in the springs. Thus, it will be possible to catch not only crucian, but also fish of other species.
If springs of the same weight are used,There is no load at the end of the gear; the last spring should be attached somewhat heavier than the others. Only in this way the equipment will lie flat on the bottom, and also not to be confused when casting.
Feeder "crucian killer" is ideal for fishing on ponds of any depth and different power currents. However, there are certain rules for fishing for homemade tackle.
First you need to decide on the placecasting. To do this, you should immediately throw several feeders in different places. The casting distance can be limited if you fix the line on the reel with the help of clips.
We throw gear and wait for them to fall onbottom. To make it convenient to follow this rod, it is best to put it on a special stand. When biting you can see a quick jerk, and after it - sagging line. When using homemade tackle to catch a carp on the feeder, you can even see a small bite.
Now you know how to make a "crucian killer". This tackle can be used to catch any large fish, such as roach, carp, carp, bleak and other peaceful species.
